Fujitsu M3093DE 청소 지침 매뉴얼 - 페이지 7

{카테고리_이름} Fujitsu M3093DE에 대한 청소 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu M3093DE 12 페이지. Departmental duplex document scanner
Fujitsu M3093DE에 대해서도 마찬가지입니다: 브로셔 (2 페이지), 설치 절차 (3 페이지), 브로셔 및 사양 (2 페이지)

페이지 인쇄

M3093EX/GX/DE/DG

ePlaCinG the

iCK

•

Remove the two bushings and the retaining hook from the roller shaft.

Bushing

Retaining Hook

•

Take the new Pick Roller and place the retaining hook on the end of

the shaft away from the gear.

•

Place one of the bushings on the roller shaft, on the same side as

the retaining spring. Make sure the large diameter of the bushing is

facing the inside of the shaft.

Back of Scanner

anD

can

artnEr

(

oller

Cont

Gear

•

Place the other bushing into

the hole at the rear of the

ADF. Note that the bushing

and the hole are keyed.

Bushing

•

Place the end of the roller

shaft with the bushing and

retaining hook into the

mounting hole at the front of

the scanner.

•

Now slide the roller shaft

into the mounting hole and

bushing in the back of the

scanner.

Front of

Scanner

•

Make sure the bushings

are in the mounting holes

properly and move the

retaining hook into the

groove in the roller shaft.

•

Reinstall the Guide A

Assembly and tighten the

two thumb screws.

93GX c

onSuMablE

EPlacEMEnt anD

Bushing

lEaninG

nStructionS