Fujitsu M4099D 설치 절차 - 페이지 2

{카테고리_이름} Fujitsu M4099D에 대한 설치 절차을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu M4099D 3 페이지. A3 duplex document scanner
Fujitsu M4099D에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 브로셔 (2 페이지), 설치 절차 (3 페이지), 설치 절차 (3 페이지), 브로셔 및 사양 (2 페이지), 브로셔 및 사양 (2 페이지), 사양 시트 (2 페이지), 청소 지침 (2 페이지)

Fujitsu Video Scanner Installation Procedures

If your model has the old style "L" bracket shipping lock.

3. Slide the scanner to its side as shown in figure below.

4. Unscrew the retainer screw and remove the shipping bracket.

5. Place the shipping bracket in the "use position" slot and secure it with the retainer

screw (see figure below)

6. Place scanner back in its normal position

Special note: The M3099A\EX\EH and M4099D do not have a shipping lock.

Step D: Connecting the Scanner.

Warning! Before proceeding ensure that the power is off when connecting or disconnecting the

SCSI cable to the scanner or workstation. Failure to follow the procedure above could result in

damage to the Video card, scanner, and/or your system.

Connect the tail of the "Y" which has the largest connector to the port on the controller

that you installed in the PC. Next connect the RS-232(serial) connector to the RS-232

port on the scanner. Lastly connect the remaining connector (video) to the video port of

the scanner and ensure that all connections are securely fastened.

Rev051806A

Windows 98SE\ME\2000\XP

Page 2 of 3