Fujitsu N7100 시작하기 - 페이지 14

{카테고리_이름} Fujitsu N7100에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu N7100 24 페이지.
Fujitsu N7100에 대해서도 마찬가지입니다: 소모품 교체 및 청소 지침 (20 페이지)

페이지 인쇄
Fujitsu N7100 시작하기
9.
Set the scanner's IP address.
On the [IP Address] window, set the scanner's IP
address, and press the [Next] button.
ATTENTION
When DHCP is not used, do not use an IP address that
already exists in the network.
If you try to set an IP address that already exists, an error
occurs.
10.
Set the DNS server.
On the [DNS Server] window, set the IP address for
the DNS server, and press the [Next] button.
HINT
If the scanner is not connected to the network, the FQDN
may not be displayed correctly.
11.
Set the Central Admin Server.
On the [Scanner Central Admin Server] window, set
whether to enable the Central Admin Server and the
Central Admin Server settings, and press the [Finish]
button.
12.
Confirm the configured settings.
On the settings confirmation window of the
installation wizard, confirm the configured basic
settings, and press the [OK] button.
The installation wizard finishes and the login
window appears.
14