Fujitsu N7100 시작하기 - 페이지 16
{카테고리_이름} Fujitsu N7100에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu N7100 24 페이지.
Fujitsu N7100에 대해서도 마찬가지입니다: 소모품 교체 및 청소 지침 (20 페이지)
페이지 인쇄
Chapter 4 Checking the Network Connection
This section describes how to check the status of the
network connection.
The network connection can be checked by using [Ping]
on the administrator window.
1.
Log in to the scanner with the user name and
password of the administrator.
Enter "admin" for [User Name] and the password
specified in the basic settings for [Password]. The
default password is "password".
The administrator window appears.
2.
Select [Ping] under [Check Network Status] in
the menu, and check the status of the network
connection on the [Ping] window.
For [Address], enter the IP address, host name, or
FQDN of the computer to be checked.
3.
Press the [Ping] button.
A ping test is performed and the results are
displayed.
For details about the results, refer to "Checking
Basic Network Operation with a Ping Test" (page
18).
4.
Press the [Logout] button to log out of the
scanner.
16