Fujitsu S510M - ScanSnap - Document Scanner 시작하기 매뉴얼 - 페이지 16
{카테고리_이름} Fujitsu S510M - ScanSnap - Document Scanner에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu S510M - ScanSnap - Document Scanner 24 페이지. Color image scanner
Fujitsu S510M - ScanSnap - Document Scanner에 대해서도 마찬가지입니다: 설치 절차 (3 페이지), 사양 (2 페이지), 빠른 설치 매뉴얼 (2 페이지), 시작하기 매뉴얼 (35 페이지), 청소 지침 (2 페이지), 청소 지침 (2 페이지)
페이지 인쇄
Symptom
The file size of the created
black-and-white image is large.
The backside of the document appears
in the scanned image when scanning a
double-sided document (print through
of the backside image).
Scanned images are not displayed on
the screen (when "Allow automatic
blank page removal" is enabled).
Scanned images are skewed (when
"Correct skewed character strings
automatically" is enabled).
The scanned images cannot be read.
Scanned images are skewed.
The orientation of scanned images is
not displayed correctly (when "Allow
automatic image rotation" is enabled).
A part of the document does not appear
in the scanned image.
A profile cannot be created with
currently configured settings.
The document is not fed properly or
gets jams.
When the document is scanned with
the Carrier Sheet, a message,
"Document size incorrect", appears.
When the document is scanned with
the Carrier Sheet, a paper jam occurs
frequently.
Black lines are produced on the
scanned document.
14 |
Check This Item
Is the black-and-white document scanned in
the "Color" mode?
Is the "Setting for text only document."
checkbox unmarked in the [Option...]
window, which you can open by clicking the
[Option...] button on the [Scanning] tab of
the "Scan and Save Settings" window?
When "Allow automatic blank page
removal" is enabled, documents containing
only a few characters are recognized as
blank pages and removed from the scanned
image data accidentally.
Are the documents fed into the ADF skewed
more than +/-5 degrees?
Have you scanned documents written in
small letters?
Are the documents fed into the ADF with
skew of more than +-5 degrees?
Depending on the contents of document, the
automatic image deskew may not work
properly.
Depending on the contents of document, the
automatic image rotation may not work
properly.
Is the "Allow automatic blank page
removal" enabled?
Is the ScanSnap in Quick Menu Mode?
1. Is the inside of the scanner dirty?
2. Are you scanning one of the following?
Thin paper
Torn paper
Folded paper
Did you put multiple small-size materials
(photos/post cards) in the Carrier Sheet for
scanning?
---
Is the scanned documents written with a
pencil?
Resolution
Select "B&W" or "Auto Color Detection"
from the [Color mode] drop-down list on
the [Scanning] tab of the "Scan and Save
Settings" window, and scan the document.
Mark the "Setting for text only document"
checkbox.
Unmark "Allow automatic blank page
removal" checkbox.
The "Correct skewed character strings
automatically" function can correct skewed
images up to +/-5 degrees. Load the
document onto the scanner so that the skew
angle is less than +/-5 degrees.
When small letters are squashed, right-click
ScanSnap Manager icon on the task bar,
select either "Best" or "Excellent" in the
[Scanning] tab and scan them again.
The "Correct skewed character strings
automatically" function can correct skewed
images up to +-5 degrees. Load the
document onto the scanner so that the
document skew does not exceed this limit.
Refer to "ScanSnap S510M for Mac
Operator's Guide" section 3.5.
Refer to "ScanSnap S510M for Mac
Operator's Guide" section 3.5
Clear the check box for "Allow automatic
blank page removal" on [Option] of the
[Scanning] tab of [Scan and Save Settings] .
To create a profile with settings you want to
use, uncheck [Use Quick Menu] and switch
to Profile Mode.
Refer to "ScanSnap S510M for Mac
Operator's Guide" section 3.5.
1. Clean the dirty locations
2. Use the Carrier Sheet for each page if you
have difficulties feeding the document.
Put only one small-size material (a photo/ a
post card) in Carrier Sheet per scanning.
Feed about 50 sheets of PPC paper or
recycled paper, and then scan the document
by using Carrier Sheet.
* You can use either unused or used
PPC/recycled paper.
It is recommended to use Carrier Sheet for
scanning.
If you are not using the Carrier Sheet for
scanning such documents, clean rollers as
often as possible.
For information about how to clean rollers,
refer to "5.3. Cleaning Inside of the
scanner".