Brother DCP-9040CN 빠른 설정 매뉴얼 - 페이지 27

{카테고리_이름} Brother DCP-9040CN에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-9040CN 31 페이지. Facsimile equipment
Brother DCP-9040CN에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지), 빠른 설정 매뉴얼 (30 페이지), 매뉴얼 (7 페이지), 부품 참조 목록 (43 페이지), 청소 및 관리 (7 페이지), 빠른 시작 매뉴얼 (10 페이지), 빠른 설정 매뉴얼 (20 페이지)

페이지 인쇄
Brother DCP-9040CN 빠른 설정 매뉴얼
Web Based Management
3
(web browser)
The Brother print server is equipped with a web server
that allows you to monitor its status or change some
of its configuration settings, using HTTP (Hyper Text
Transfer Protocol).
Note
• The User Name is 'admin' and the default
password is 'access'. You can use a web
browser to change this password.
• We recommend Microsoft Internet Explorer 6.0
(or higher) or Firefox
Windows® and Safari™ 1.0 for Macintosh
Please also make sure that JavaScript and
cookies are always enabled in whichever
browser you use. We recommend you upgrade
to Safari™ 1.2 or higher to enable JavaScript.
To use a web browser, you will need to know the
IP address of the print server.
1
Open your browser.
2
Type http://printer_ip_address / into your
browser (Where "printer_ip_address" is the IP
address of the printer or the print server name).
For example: http://192.168.1.2/
See Chapter 2 of the Network User's Guide
on the CD-ROM.
®
®
1.0 (or higher) for
®
.
For Network Users
Restoring the network
4
settings to factory default
To restore all network settings of the internal
Print/Scan server to factory default, please follow the
steps below.
1
Make sure the machine is not in use, then
disconnect all the cables from the machine
(except power cable).
2
Press Menu, 4, 0.
3
Press 1 to select Reset.
4
Press 1 to select Yes.
5
The machine will restart. Re-connect cables
once this is complete.
25