Brother DCP-9040CN Quick Setup Manual - Page 27

Browse online or download pdf Quick Setup Manual for Print Server Brother DCP-9040CN. Brother DCP-9040CN 31 pages. Facsimile equipment
Also for Brother DCP-9040CN: Brochure & Specs (4 pages), Quick Setup Manual (30 pages), Manual (7 pages), Parts Reference List (43 pages), Cleaning And Care (7 pages), Quick Start Manual (10 pages), Quick Setup Manual (20 pages)

Print Page

Web Based Management

(web browser)

The Brother print server is equipped with a web server

that allows you to monitor its status or change some

of its configuration settings, using HTTP (Hyper Text

Transfer Protocol).

Note

• The User Name is 'admin' and the default

password is 'access'. You can use a web

browser to change this password.

• We recommend Microsoft Internet Explorer 6.0

(or higher) or Firefox

Windows® and Safari™ 1.0 for Macintosh

Please also make sure that JavaScript and

cookies are always enabled in whichever

browser you use. We recommend you upgrade

to Safari™ 1.2 or higher to enable JavaScript.

To use a web browser, you will need to know the

IP address of the print server.

Open your browser.

Type http://printer_ip_address / into your

browser (Where "printer_ip_address" is the IP

address of the printer or the print server name).

For example: http://192.168.1.2/

See Chapter 2 of the Network User's Guide

on the CD-ROM.

1.0 (or higher) for

For Network Users

Restoring the network

settings to factory default

To restore all network settings of the internal

Print/Scan server to factory default, please follow the

steps below.

Make sure the machine is not in use, then

disconnect all the cables from the machine

(except power cable).

Press Menu, 4, 0.

Press 1 to select Reset.

Press 1 to select Yes.

The machine will restart. Re-connect cables

once this is complete.