Fujitsu SCANPARTNER 600C 사용자 설명서 - 페이지 23

{카테고리_이름} Fujitsu SCANPARTNER 600C에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu SCANPARTNER 600C 25 페이지. Image scanner
Fujitsu SCANPARTNER 600C에 대해서도 마찬가지입니다: 소모품 교체 및 청소 지침 (7 페이지), 설치 절차 (5 페이지), 사용자 설명서 (23 페이지)

페이지 인쇄
Fujitsu SCANPARTNER 600C 사용자 설명서
5) Check the feeding roller condition and do the
cleaning if necessary.
Question: Paper becomes skewed in the scanner.
Answer:
Check the condition of the feed roller and
cleaning if necessary.
Question: When I power on the scanner, it makes noises
and will not stand ready.
Answer:
Possibilities for this condition are:
1) The shipping retainer was not removed from
the bottom of the scanner or
2) The scanner is not sitting on a flat surface.
This may cause the scanner to function
improperly.
Question: When I power on the scanner, the lamp does
not come on.
Answer:
Contact your authorized local dealer or service
provider.
Question: Sometimes while scanning the scanner hangs or
the system crashes.
Answer:
Make sure that:
1) The SCSI cable is firmly seated and
2) the SCSI bus is terminated and configured
correctly.
4-2