Fujitsu SCANPARTNER 600C 사용자 설명서 - 페이지 5

{카테고리_이름} Fujitsu SCANPARTNER 600C에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu SCANPARTNER 600C 23 페이지. Image scanner
Fujitsu SCANPARTNER 600C에 대해서도 마찬가지입니다: 사용자 설명서 (25 페이지), 소모품 교체 및 청소 지침 (7 페이지), 설치 절차 (5 페이지)

페이지 인쇄

Installation and Connections

Please unpack the Scanner carefully and check the contents against the "checklist". If any items are missing or

damaged, please contact your authorised local dealer immediately.

Precautions:

Keep the Scanner out of direct sunlight. Direct exposure to the sun or excessive heat may cause

damage to the unit.

Do not install the Scanner in a humid or dusty place.

Be sure to use the proper AC power source.

Place the Scanner securely on an even, flat surface. Tilted or uneven surfaces may cause mechanical

or paper-feeding problems.

Retain the Scanner box and packing materials for shipping purposes.

2.1

Shipping Bracket

The Scanner has a bracket that locks the carrier mechanism for transportation purposes. This bracket must be

put into the use position before using the Scanner.

Note:

If the power is turned on before the bracket has been removed the PAPER JAM light will

turn on. Before proceeding, turn the power off, disconnect all cables and follow the

instructions below to remove the shipping bracket.

2.1.1

Removing the Shipping Bracket (refer to figures 2-1 and 2-2)

ii)

iii)

vi)

Carefully place the Scanner in an upright position on its front.

Using a suitable screwdriver, remove the screw and pull out the shipping bracket.

Put the shipping bracket into the use position with the short side extending into the scanner

base and secure it with the screw.

Carefully place the Scanner back into its normal position.