Fujitsu ScanSnap fi-5110C 시작하기 - 페이지 12

{카테고리_이름} Fujitsu ScanSnap fi-5110C에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ScanSnap fi-5110C 27 페이지. Color duplex workgroup scanner
Fujitsu ScanSnap fi-5110C에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지), 데이터시트 (2 페이지)

페이지 인쇄

Chapter2

2.1 Installing the Scanner

Application

Both the scanner driver and image capturing application

software (called "application" hereafter) must be

installed on your PC.

There are two types of drivers for scanner, The

FUJITSU TWAIN 32 Scanner Driver and FUJITSU

ISIS Scanner Driver, as well as two software applica-

tions, ScandAll 21 and QuickScan Pro™, are provided

with this product. The following sections describe how

to install each driver and application.

Please install the scanner driver

ATTENTION

before connecting the scanner to your

PC.

If you connect the scanner before

installing the scanner driver, the scan-

ner will not operate correctly.

If you have connected the scanner

beforehand, the "Found New Hard-

ware Wizard" screen appears (this

screen might differ slightly according

to the used OS) . On this screen, click

the [Cancel] button to close the

Wizard screen and install the scanner

driver first.

For FUJITSU TWAIN32 Scanner Driver

■ Preparation

Confirm the following items before installing the appli-

cation.

• Remove the Setup CD-ROM from its package.

• Uninstall any older version of FUJITSU

TWAIN 32 driver if already installed.

Uninstall [Scanner Utility for Microsoft

ATTENTION

Windows] from [Add/Remove Pro-

grams] of the control panel.

INSTALLATION OF THE SCANNER

■ Installing the FUJITSU TWAIN32

Scanner Driver

Windows XP screenshots are used in

ATTENTION

this section as examples. The win-

dows and operations may slightly vary

depending on your OS

1. Turn on your PC and log on to Windows.

When using Windows 2000 or Win-

ATTENTION

dows XP, log on as a user with

"Administrator" privileges.

2. Insert the Setup CD-ROM into the CD drive.

⇒

<SETUP DISK START UP SCREEN> appears.

This screen may not appear when the

ATTENTION

"Autoplay" setting of your PC is OFF.

In this case, run "Install.exe" in this

CD-ROM directly from the "Explorer"

or "My Computer".

3. Click [INSTALL PRODUCTS].