Fujitsu ScanSnap iScanner fi-6010N 시작하기 매뉴얼 - 페이지 5
{카테고리_이름} Fujitsu ScanSnap iScanner fi-6010N에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ScanSnap iScanner fi-6010N 45 페이지. Network adf scanner
Fujitsu ScanSnap iScanner fi-6010N에 대해서도 마찬가지입니다: 사양 (2 페이지), 시작하기 매뉴얼 (21 페이지), 브로셔 및 사양 (2 페이지), 시작하기 매뉴얼 (21 페이지), 청소 지침 (2 페이지), 청소 지침 (2 페이지)
페이지 인쇄
Bescheinigung des Herstellers /
Importeurs
Für den fi-6010N wird folgendes bescheinigt:
In Übereinsstimmung mit den Bestimmungen
der EN45014(CE) funkentstört
Maschinenlärminformationsverordnung 3.
GPSGV: Der höchste Schalldruckpegel beträgt
70 dB (A) oder weniger, gemäß EN ISO 7779.
■ Disclaimer of Liability
Reproducibility of the Scanned Image
Data
Confirm that the image data scanned with this
product meets your requirements (for example,
image reproducibility in size accuracy, fidelity,
content, colors).
Make sure that there are no missing parts in the
scanned image data before disposing of the
original document used for scanning.
Use in High-safety Applications
This product has been designed and manufactured
on the assumption that it will be used in office,
personal, domestic, regular industrial, and
general-purpose applications. It has not been
designed and manufactured for use in applications
(simply called "high-safety applications" from
here on) that directly involve danger to life and
health when a high degree of safety is required,
for example, in the control of nuclear reactions at
nuclear power facilities, automatic flight control
of aircraft, air traffic control, operation control in
mass-transport systems, medical equipment for
sustaining life, and missile firing control in
weapons systems, and when provisionally the
safety in question is not ensured. The user should
use this product with adopting measures for
ensuring safety in such high-safety applications.
PFU LIMITED assumes no liability whatsoever
for damages arising from use of this product by
the user in high-safety applications, and for any
claims or compensation for damages by the user
or a third party.
Use of Mercury
Lamp(s) inside the scanner contain
H
mercury and must be recycled or
g
disposed of according to local, state,
or federal laws.
To avoid unexpected injuries:
Do not put the substance contained in the lamp
in your mouth as it has mercury.
Do not breathe the chemical liquid contained in
the scanner lamps.
Do not incinerate, crush, or shred the lamps or
scanner parts.
LCD Peculiarities
The LCD backlight is a fluorescent tube that
contains some mercury.
Be aware that neither of the following is
considered a fault.
Despite the advanced technologies used
to produce the devices TFT color
LCD's, the large number of pixels
involved means that an occasional
(always-on) bright dot or (always-off)
dark dot may be visible.
The characteristics of the LCD mean
that there may be some variation in hue
and intensity of colors across the screen.
Replacing Batteries
In order to retain data such as BIOS information,
this product has a battery (CMOS RAM battery)
on board.
ARNI N G
About Maintenance
The user must not perform repairs on this scanner.
PFU assumes no liability to any damage caused by
taking apart the scanner, as doing so is not covered
under the warranty.
Contact your FUJITSU scanner dealer or an
authorized FUJITSU scanner service provider for
repairs to this product.
For contact information, visit the following web
page to find the FUJITSU/PFU office for your
country.
http://imagescanner.fujitsu.com/warranty.html
Or, refer to the contact list on the last page of this
document.
iv
Do not replace the battery
yourself, as there is a risk of
explosion if the wrong type is
used. Please contact your
maintenance engineer in
charge when the battery runs
low.
Do not touch the battery. Never
install or remove the battery by
yourself. Doing so may cause
electric shock or static
electricity which can damage
the device.