Fujitsu ScanSnap iScanner fi-6010N 시작하기 매뉴얼 - 페이지 7
{카테고리_이름} Fujitsu ScanSnap iScanner fi-6010N에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ScanSnap iScanner fi-6010N 45 페이지. Network adf scanner
Fujitsu ScanSnap iScanner fi-6010N에 대해서도 마찬가지입니다: 사양 (2 페이지), 시작하기 매뉴얼 (21 페이지), 브로셔 및 사양 (2 페이지), 시작하기 매뉴얼 (21 페이지), 청소 지침 (2 페이지), 청소 지침 (2 페이지)
페이지 인쇄
■ Important Notes
Warning Indications Used in This
Manual
This indication alerts operators
ARNI N G
to an operation that, if not strictly
observed, may result in severe
injury or death.
This indication alerts operators to
AUTION
an operation that, if not strictly
observed, may result in safety
hazards to personnel or damage
to equipment.
Symbols Used in This Manual
This symbol alerts operators to partic-
ATTENTION
ularly important information. Be sure
to read this information.
This symbol alerts operators to helpful
advice regarding operation.
HINT
A TRIANGLE symbol indicates that special
care and attention is required.
The drawing inside the triangle shows the
specific caution.
A CIRCLE with a diagonal line inside
shows action which users may not perform.
The drawing inside or under the circle
shows the specific action that is not
allowed.
Outline characters on a colored
background show instructions users should
R
follow.
It may also include the drawing that shows
the specific instruction.
Warning Label
The glass scanner windows inside the ADF
can become hot when the scanner is used.
Be careful not to touch the surface of the
glass scanner windows.
Do NOT remove from the scanner,
ATTENTION
stain or scratch the warning labels.
Screen Examples in This Manual
The screen examples in this manual are subject to
change without notice in the interest of product
improvement. If the actual displayed screen
differs from the screen examples in this manual,
operate by following the actual displayed screen
while referring to the User's Manual of the scanner
application you are using.
The screen examples shown in this manual are of
Windows Vista.
For Windows Server 2012/Windows 8
Users
To start applications for this product or display
Control Panel, use the All apps screen.
The All apps screen is displayed by following the
procedure below.
1. Right-click the Start screen.
2. Click [All apps] on the app bar.
Example: Windows 8 screen
vi