Brother HL-1870N 교체 지침 - 페이지 2

{카테고리_이름} Brother HL-1870N에 대한 교체 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother HL-1870N 4 페이지. Brother imprimante laser - guide de configuration rapide (french)
Brother HL-1870N에 대해서도 마찬가지입니다: 브로셔 및 사양 (6 페이지), 빠른 설정 매뉴얼 (2 페이지), 드라이버 설치 매뉴얼 (2 페이지), 드라이버 설치 매뉴얼 (2 페이지), 부품 목록 (27 페이지), (프랑스어) 빠른 설치 가이드 (2 페이지)

How to Replace the PF Kit (1850/1870N)

Step 5

1. Move the white tab downward until it

stops as shown by the arrow in Figure

5. Then slide the locking piece towards

the right and remove it from the

machine. See Figure 5.

2. Move the paper pick-up roller towards

the right and lift it out of the machine.

Please note: The paper pick-up roller

assembly consists of one roller, two roller

collars, two springs and two teflon

washers. See Figure 6.

Step 6

1. Remove two white roller collars,

two springs and two teflon

washers from either side of the

paper pick-up roller. These parts

will be re-used.

Step 7

1. Install the springs, teflon

washers and white roller collars

on the new paper pick-up roller.

See Figures 7 and 8.

Please see note on the next page.

Figure 5.

Figure 6.

Figure 7.

Figure 8.