Brother HL-1870N Instructions de remplacement - Page 2

Parcourez en ligne ou téléchargez le pdf Instructions de remplacement pour {nom_de_la_catégorie} Brother HL-1870N. Brother HL-1870N 4 pages. Brother imprimante laser - guide de configuration rapide (french)
Également pour Brother HL-1870N : Brochure & Specs (6 pages), Manuel d'installation rapide (2 pages), Manuel d'installation du pilote (2 pages), Manuel d'installation du pilote (2 pages), Liste des pièces (27 pages), (français) Guide D'installation Rapide (2 pages)

How to Replace the PF Kit (1850/1870N)

Step 5

1. Move the white tab downward until it

stops as shown by the arrow in Figure

5. Then slide the locking piece towards

the right and remove it from the

machine. See Figure 5.

2. Move the paper pick-up roller towards

the right and lift it out of the machine.

Please note: The paper pick-up roller

assembly consists of one roller, two roller

collars, two springs and two teflon

washers. See Figure 6.

Step 6

1. Remove two white roller collars,

two springs and two teflon

washers from either side of the

paper pick-up roller. These parts

will be re-used.

Step 7

1. Install the springs, teflon

washers and white roller collars

on the new paper pick-up roller.

See Figures 7 and 8.

Please see note on the next page.

Figure 5.

Figure 6.

Figure 7.

Figure 8.