Fujitsu ScanSnap iX500 Wi-Fi 연결 매뉴얼 - 페이지 19

{카테고리_이름} Fujitsu ScanSnap iX500에 대한 Wi-Fi 연결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ScanSnap iX500 41 페이지. Windows
Fujitsu ScanSnap iX500에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (17 페이지), 시작하기 매뉴얼 (16 페이지), 빠른 설정 매뉴얼 (3 페이지), 시작하기 (18 페이지), 안전 주의사항 (11 페이지), 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)

Connecting a Mobile Device to the ScanSnap via a Wireless

Access Point

ATTENTION

To connect a mobile device to the ScanSnap via wireless LAN, you also need to configure the settings

for the computer. Set up a wireless network by following the connection method.

Preparation

l Connect a mobile device to a wireless access point that is to be used when connecting a

mobile device to the ScanSnap.

For a successful connection, the following information of the wireless access point is required:

Network name (SSID)

Security key (password)

l When setting up a wireless network, you need a password. The default password is the last

four digits of the ScanSnap serial number.

l To connect the ScanSnap and a mobile device, you need to install ScanSnap Connect

Application on your mobile device.

Download ScanSnap Connect Application from the following application stores:

For iOS

iTunes

App Store

For Android

Google Play

Connection Method

This method assumes that ScanSnap Manager is not installed on the computer that is to be

connected to the ScanSnap. Install ScanSnap Manager from the Setup DVD-ROM and follow the

Wireless Network Setup Wizard that appears after the installation is complete.

HINT

Be careful not to close the ADF paper chute (cover) of the ScanSnap.

Click the [Setup Now] button.

Network Connection