Brother HL-2270DW 네트워크 사용 설명서 - 페이지 22

{카테고리_이름} Brother HL-2270DW에 대한 네트워크 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother HL-2270DW 47 페이지. How do i configure the wireless printer using wi-fi protected setup or aoss and install the printer driver in windows?
Brother HL-2270DW에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (36 페이지), 빠른 설정 매뉴얼 (36 페이지), 설치 매뉴얼 (5 페이지), 빠른 설정 매뉴얼 (35 페이지), 자주 묻는 질문 및 문제 해결 (6 페이지)

페이지 인쇄

Configuring your machine for a wireless network (For HL-2270DW)

Using the PIN Method of Wi-Fi Protected Setup

If your WLAN access point/router supports Wi-Fi Protected Setup (PIN Method), you can configure the

machine easily. The PIN (Personal Identification Number) Method is one of the connection methods

developed by the Wi-Fi Alliance

Registrar (a device that manages the wireless LAN), you can setup the WLAN network and security settings.

See the user's guide supplied with your WLAN access point/router for instructions on how to access the

Wi-Fi Protected Setup mode.

Note

Routers or access points that support Wi-Fi Protected Setup have a symbol as shown below.

How to configure your wireless machine, using the PIN Method of Wi-Fi Protected Setup

IMPORTANT

If you are going to connect the Brother machine to your network, we recommend that you contact your

system administrator prior to installation.

Make sure that the power cord is plugged in.

Turn on the machine and wait until the machine is in the Ready state.

Press the wireless setup button located at the back of the machine for 3 seconds or more as shown in

the illustration below.

Note

Use a pointy object such as a ballpoint pen to press the button.

The machine will print a piece of paper that shows an 8 digit PIN and starts searching for a WLAN access

point/router for 5 minutes.

. By inputting a PIN which is created by an Enrollee (your machine) to the