Brother HL-2270DW 빠른 설정 매뉴얼 - 페이지 20

{카테고리_이름} Brother HL-2270DW에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother HL-2270DW 36 페이지. How do i configure the wireless printer using wi-fi protected setup or aoss and install the printer driver in windows?
Brother HL-2270DW에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (36 페이지), 네트워크 사용 설명서 (47 페이지), 설치 매뉴얼 (5 페이지), 빠른 설정 매뉴얼 (35 페이지), 자주 묻는 질문 및 문제 해결 (6 페이지)

페이지 인쇄

Wireless Network

If the confirmation screen appears, check the

box and click Next. When the following screen

appears, check Yes if you want to connect with

the listed SSID. Click Next and go to r.

The wizard will search for wireless networks

available from your machine. Choose the SSID

that your checked in advance on page 15), and

then click Next.

Note

• If the list is blank, check that the access point

has power and is broadcasting the SSID, and

then see if the machine and the access point

are within range for wireless communication.

Then, click Refresh.

• If your access point is set to not broadcast the

SSID you can manually add it by clicking the

Advanced button. Follow the on-screen

instructions for entering the Name (SSID), and

then click Next.

If your network is not configured for

Authentication and Encryption, the following

screen will appear. To continue configuration,

click OK and go to r.

Enter the Network Key and then enter the key

again in Confirm Network Key, then click

Next.

Click Next. The settings will be sent to your

machine.

Note

• The settings will remain unchanged if you click

Cancel.

• If you want to manually enter the IP address

settings of your machine, click Change IP

Address and enter the necessary IP address

settings for your network.

• (For USB cable users) If the wireless setup

failure screen appears, click Retry and try

starting from step o again.

For USB cable users, go to w.

For Ethernet cable users, go to t.

Windows