Brother HL-2270DW Посібник з швидкого налаштування - Сторінка 20

Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Сервер друку Brother HL-2270DW. Brother HL-2270DW 36 сторінок. How do i configure the wireless printer using wi-fi protected setup or aoss and install the printer driver in windows?
Також для Brother HL-2270DW: Посібник з швидкого налаштування (36 сторінок), Посібник користувача мережі (47 сторінок), Посібник з монтажу (5 сторінок), Посібник з швидкого налаштування (35 сторінок), Питання та усунення несправностей (6 сторінок)

Wireless Network

If the confirmation screen appears, check the

box and click Next. When the following screen

appears, check Yes if you want to connect with

the listed SSID. Click Next and go to r.

The wizard will search for wireless networks

available from your machine. Choose the SSID

that your checked in advance on page 15), and

then click Next.

Note

• If the list is blank, check that the access point

has power and is broadcasting the SSID, and

then see if the machine and the access point

are within range for wireless communication.

Then, click Refresh.

• If your access point is set to not broadcast the

SSID you can manually add it by clicking the

Advanced button. Follow the on-screen

instructions for entering the Name (SSID), and

then click Next.

If your network is not configured for

Authentication and Encryption, the following

screen will appear. To continue configuration,

click OK and go to r.

Enter the Network Key and then enter the key

again in Confirm Network Key, then click

Next.

Click Next. The settings will be sent to your

machine.

Note

• The settings will remain unchanged if you click

Cancel.

• If you want to manually enter the IP address

settings of your machine, click Change IP

Address and enter the necessary IP address

settings for your network.

• (For USB cable users) If the wireless setup

failure screen appears, click Retry and try

starting from step o again.

For USB cable users, go to w.

For Ethernet cable users, go to t.

Windows