Fujitsu eternus af 구성 매뉴얼 - 페이지 9

{카테고리_이름} Fujitsu eternus af에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu eternus af 28 페이지. Fibre channel for citrix xenserver
Fujitsu eternus af에 대해서도 마찬가지입니다: 구성 매뉴얼 (25 페이지), 구성 매뉴얼 (32 페이지), 구성 매뉴얼 (43 페이지)

페이지 인쇄

Chapter 3

Notes

Note the following issues when connecting the ETERNUS DX/AF to a server.

3.1

LAN Environment Notes

The ETERNUS DX/AF can be connected to a server via an existing LAN. However, a decrease in LAN perform-

•

ance may be observed by prior users of said LAN.

For the iSCSI LAN (used to transfer data), do not set multipath configuration with IP Network Multipathing

•

(IPMP).

Since an iSCSI LAN handles large amounts of data (traffic volumes) like an FC-SAN, the iSCSI LAN must have

•

its own switch and be a dedicated LAN that is separate from the business LANs.

For IP network security, separate the iSCSI LAN from the management LAN (for administration).

•

The iSCSI LAN must be configured as a dedicated LAN for each path from a server to the ETERNUS DX/AF.

•

A configuration where multiple LAN ports of a single server are connected to the same network may be

•

restricted depending on the OS and/or driver specifications. For a multipath connection, connect each path

using different LAN segments by separating the VLAN and so on.

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (iSCSI) for Oracle Solaris

P3AM-4042-18ENZ0