Fujitsu eternus af 구성 매뉴얼 - 페이지 21

{카테고리_이름} Fujitsu eternus af에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu eternus af 32 페이지. Fibre channel for citrix xenserver
Fujitsu eternus af에 대해서도 마찬가지입니다: 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (25 페이지), 구성 매뉴얼 (43 페이지)

페이지 인쇄

Chapter 8

Setting Up XenServer

8.1

Setting Up the Fibre Channel Cards

8.1.3

For Fujitsu QLogic Fibre Channel Cards

This section explains how to install QLogic Fibre Channel cards in the XenServer host and how to connect the

ETERNUS DX/AF.

For the installation procedure and functions regarding XenCenter, refer to the manuals that can be obtained

on the following Citrix web-site:

https://www.citrix.com/support/

Since the standard driver that is supplied with the OS is used for the Fibre Channel driver, other drivers do

not need to be installed.

Use the following procedure to set the drive parameters.

Use the SANsurfer FC HBA CLI or the QConvergeConsole CLI to set the driver parameters. The SANsurfer

•

FC HBA CLI or the QConvergeConsole CLI is installed in XenServer as standard.

For details on how to use the SANsurfer FC HBA CLI or the QConvergeConsole CLI, refer to the command

help.

Set the parameters without the ETERNUS DX/AF connected.

•

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Citrix

XenServer

P3AM-4572-19ENZ0