Fujitsu ETERNUS DX Disk 구성 매뉴얼 - 페이지 27

{카테고리_이름} Fujitsu ETERNUS DX Disk에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS DX Disk 44 페이지. Server connection, fcoe for linux driver settings for converged network adapter cards
Fujitsu ETERNUS DX Disk에 대해서도 마찬가지입니다: 사용자 설명서 (35 페이지), 사용자 설명서 (42 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (29 페이지), 구성 매뉴얼 (25 페이지), 구성 매뉴얼 (32 페이지), 구성 매뉴얼 (35 페이지), 구성 매뉴얼 (31 페이지), 구성 매뉴얼 (43 페이지), 구성 매뉴얼 (21 페이지), 구성 매뉴얼 (24 페이지)

Fujitsu ETERNUS DX Disk 구성 매뉴얼
Chapter 3
Notes
3.4

Fibre Channel Switch Notes

3.4
Fibre Channel Switch Notes
When a Fibre Channel switch (ETERNUS SN200 series, Brocade series) is to be used between the server and
ETERNUS DX, follow the preparation-in-advance and Fibre Channel switch setup procedures given in the "FU-
JITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel Switch Set-
tings".
Which Fibre Channel switches can be connected to the ETERNUS DX varies depending on the connection
environment (server OS and ETERNUS DX model). Refer to "Server Support Matrix for FC-SWITCH" to check
the available Fibre Channel switches in advance.
When connecting any of the following Fibre Channel cards to a Fibre Channel switch, Fibre Channel switch
ports must be set:
SP1X7FAB2F
-
SP1X7FAA2F
-
SP1X5FAA2F
-
SE0X7F22F
-
-
SE0X7F21F
XSPFC212A
-
XSPFC202A
-
XSPFC211A
-
XSPFC201A
-
-
Oracle Fibre Channel cards (with a "QF" or "QL" designation model name)
QLogic Fibre Channel cards (using Oracle brand drivers)
-
Set the link speeds of the Fibre Channel switch ports that connect to the Fibre Channel cards installed in
the server according to the following table:
Combination of the devices
Maximum link speed of Fibre Channel
card
16Gbit/s
8Gbit/s
4Gbit/s
2Gbit/s
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
Maximum link speed of the Fibre
Channel switch
16Gbit/s
8Gbit/s
4Gbit/s
2Gbit/s
16Gbit/s
8Gbit/s
4Gbit/s
2Gbit/s
16Gbit/s
8Gbit/s
4Gbit/s
2Gbit/s
16Gbit/s
8Gbit/s
4Gbit/s
2Gbit/s
27
Copyright 2015 FUJITSU LIMITED
Set the Fibre Channel switch port link
speed to ...
16Gbit/s fixed
8Gbit/s fixed
4Gbit/s fixed
-
8Gbit/s fixed
8Gbit/s fixed
4Gbit/s fixed
2Gbit/s fixed
4Gbit/s fixed
4Gbit/s fixed
4Gbit/s fixed
2Gbit/s fixed
-
2Gbit/s fixed
2Gbit/s fixed
2Gbit/s fixed
P3AM-3702-16ENZ0