Fujitsu ETERNUS DX Disk 구성 매뉴얼 - 페이지 29

{카테고리_이름} Fujitsu ETERNUS DX Disk에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS DX Disk 44 페이지. Server connection, fcoe for linux driver settings for converged network adapter cards
Fujitsu ETERNUS DX Disk에 대해서도 마찬가지입니다: 사용자 설명서 (35 페이지), 사용자 설명서 (42 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (29 페이지), 구성 매뉴얼 (25 페이지), 구성 매뉴얼 (32 페이지), 구성 매뉴얼 (35 페이지), 구성 매뉴얼 (31 페이지), 구성 매뉴얼 (43 페이지), 구성 매뉴얼 (21 페이지), 구성 매뉴얼 (24 페이지)

Fujitsu ETERNUS DX Disk 구성 매뉴얼
Chapter 3
Notes
3.6

VERITAS Cluster Server (VCS) Notes

3.6
VERITAS Cluster Server (VCS) Notes
Installing VERITAS Cluster Server
VERITAS Cluster Server should be installed according to the directions given in the documentation provided
with VERITAS Cluster Server.
3.7

MPxIO Notes

When connecting the ETERNUS DX storage systems to a server with MPxIO installed, host responses must be
set for the ETERNUS DX storage systems.
Also, check the "Server Support Matrix" for MPxIO support conditions.
MPxIO must be disabled in the setup file for the paths of connected devices that MPxIO does not support
(such as a tape device).
3.8

Oracle Solaris Cluster Installation Notes

Before installing the Oracle Solaris Cluster software, carefully read the following notes and check the Oracle
web-site (http://www.oracle.com/), etc.
3.8.1

Supported Versions and Hardware

When installing Oracle Solaris Cluster on a server that is connected to an ETERNUS DX, check the "Server Sup-
port Matrix" for usage conditions.
3.8.2

Multipath Configuration

When connecting an Oracle Solaris Cluster server to ETERNUS DX storage systems via a multipath configura-
tion, the Sun StorEdge Traffic Manager (MPxIO) multipath driver must be installed.
3.8.3

Reset Group Setting

When connecting an Oracle Solaris Cluster server to ETERNUS DX storage systems, reset groups must be set
for the ETERNUS DX storage systems.
3.8.4

Host Response Setting

When connecting an Oracle Solaris Cluster server to ETERNUS DX storage systems, host responses must be set
for the ETERNUS DX storage systems.
3.8.5

Installing VxVM

If installing VxVM on an Oracle Solaris Cluster server, use the Oracle OEM version of VxVM. Refer to
"3.5.3 Oracle OEM VxVM" (page 28)
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
for details.
29
Copyright 2015 FUJITSU LIMITED
P3AM-3702-16ENZ0