Fujitsu ETERNUS DX Disk Configuration Manual - Page 29

Browse online or download pdf Configuration Manual for Storage Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 44 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Also for Fujitsu ETERNUS DX Disk: User Manual (35 pages), User Manual (42 pages), Configuration Manual (28 pages), Configuration Manual (28 pages), Configuration Manual (29 pages), Configuration Manual (25 pages), Configuration Manual (32 pages), Configuration Manual (35 pages), Configuration Manual (31 pages), Configuration Manual (43 pages), Configuration Manual (21 pages), Configuration Manual (24 pages)

Fujitsu ETERNUS DX Disk Configuration Manual
Chapter 3
Notes
3.6

VERITAS Cluster Server (VCS) Notes

3.6
VERITAS Cluster Server (VCS) Notes
Installing VERITAS Cluster Server
VERITAS Cluster Server should be installed according to the directions given in the documentation provided
with VERITAS Cluster Server.
3.7

MPxIO Notes

When connecting the ETERNUS DX storage systems to a server with MPxIO installed, host responses must be
set for the ETERNUS DX storage systems.
Also, check the "Server Support Matrix" for MPxIO support conditions.
MPxIO must be disabled in the setup file for the paths of connected devices that MPxIO does not support
(such as a tape device).
3.8

Oracle Solaris Cluster Installation Notes

Before installing the Oracle Solaris Cluster software, carefully read the following notes and check the Oracle
web-site (http://www.oracle.com/), etc.
3.8.1

Supported Versions and Hardware

When installing Oracle Solaris Cluster on a server that is connected to an ETERNUS DX, check the "Server Sup-
port Matrix" for usage conditions.
3.8.2

Multipath Configuration

When connecting an Oracle Solaris Cluster server to ETERNUS DX storage systems via a multipath configura-
tion, the Sun StorEdge Traffic Manager (MPxIO) multipath driver must be installed.
3.8.3

Reset Group Setting

When connecting an Oracle Solaris Cluster server to ETERNUS DX storage systems, reset groups must be set
for the ETERNUS DX storage systems.
3.8.4

Host Response Setting

When connecting an Oracle Solaris Cluster server to ETERNUS DX storage systems, host responses must be set
for the ETERNUS DX storage systems.
3.8.5

Installing VxVM

If installing VxVM on an Oracle Solaris Cluster server, use the Oracle OEM version of VxVM. Refer to
"3.5.3 Oracle OEM VxVM" (page 28)
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
for details.
29
Copyright 2015 FUJITSU LIMITED
P3AM-3702-16ENZ0