Fujitsu ETERNUS DX Disk Konfigurationshandbuch - Seite 29

Blättern Sie online oder laden Sie pdf Konfigurationshandbuch für Lagerung Fujitsu ETERNUS DX Disk herunter. Fujitsu ETERNUS DX Disk 44 Seiten. Server connection, fcoe for linux driver settings for converged network adapter cards
Auch für Fujitsu ETERNUS DX Disk: Benutzerhandbuch (35 seiten), Benutzerhandbuch (42 seiten), Konfigurationshandbuch (28 seiten), Konfigurationshandbuch (28 seiten), Konfigurationshandbuch (29 seiten), Konfigurationshandbuch (25 seiten), Konfigurationshandbuch (32 seiten), Konfigurationshandbuch (35 seiten), Konfigurationshandbuch (31 seiten), Konfigurationshandbuch (43 seiten), Konfigurationshandbuch (21 seiten), Konfigurationshandbuch (24 seiten)

Chapter 3

Notes

3.6

VERITAS Cluster Server (VCS) Notes

3.6

VERITAS Cluster Server (VCS) Notes

Installing VERITAS Cluster Server

•

VERITAS Cluster Server should be installed according to the directions given in the documentation provided

with VERITAS Cluster Server.

3.7

When connecting the ETERNUS DX storage systems to a server with MPxIO installed, host responses must be

set for the ETERNUS DX storage systems.

Also, check the "Server Support Matrix" for MPxIO support conditions.

MPxIO must be disabled in the setup file for the paths of connected devices that MPxIO does not support

(such as a tape device).

3.8

Before installing the Oracle Solaris Cluster software, carefully read the following notes and check the Oracle

web-site (http://www.oracle.com/), etc.

3.8.1

When installing Oracle Solaris Cluster on a server that is connected to an ETERNUS DX, check the "Server Sup-

port Matrix" for usage conditions.

3.8.2

When connecting an Oracle Solaris Cluster server to ETERNUS DX storage systems via a multipath configura-

tion, the Sun StorEdge Traffic Manager (MPxIO) multipath driver must be installed.

3.8.3

When connecting an Oracle Solaris Cluster server to ETERNUS DX storage systems, reset groups must be set

for the ETERNUS DX storage systems.

3.8.4

When connecting an Oracle Solaris Cluster server to ETERNUS DX storage systems, host responses must be set

for the ETERNUS DX storage systems.

3.8.5

If installing VxVM on an Oracle Solaris Cluster server, use the Oracle OEM version of VxVM. Refer to

"3.5.3 Oracle OEM VxVM" (page 28)

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris

for details.

P3AM-3702-16ENZ0