Fujitsu ETERNUS DX Disk 구성 매뉴얼 - 페이지 12

{카테고리_이름} Fujitsu ETERNUS DX Disk에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS DX Disk 29 페이지. Server connection, fcoe for linux driver settings for converged network adapter cards
Fujitsu ETERNUS DX Disk에 대해서도 마찬가지입니다: 사용자 설명서 (35 페이지), 사용자 설명서 (42 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (44 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (25 페이지), 구성 매뉴얼 (32 페이지), 구성 매뉴얼 (35 페이지), 구성 매뉴얼 (31 페이지), 구성 매뉴얼 (43 페이지), 구성 매뉴얼 (21 페이지), 구성 매뉴얼 (24 페이지)

페이지 인쇄

Chapter 4

Setting Up the Server

4.2

Creating a WWN Instance Management Table for Storage System

(3)

Enter the results in the "Physical slot name" column of the "WWN instance management table for

the server".

Example:

Physical slot name

SERV1_SLOT0

SERV1_SLOT1

This completes the "WWN instance management table for the server".

4.2

Creating a WWN Instance Management Table for Storage

System

Create a "WWN instance management table for storage system" (provided in

ment Table Templates" (page

age systems.

(Example) When there are two ports on the ETERNUS DX/AF storage systems:

Channel Adapter

CM0 CA0Port0

CM1 CA0Port0

Channel Adapter

•

CA name in the ETERNUS DX/AF storage systems

•

WWN

The WWN for each CA in the ETERNUS DX/AF (check using ETERNUSmgr or ETERNUS Web GUI)

Alias name

•

An arbitrarily-chosen alias name for each CA that may be used when setting up the fjpfca driver

This use of "alias name" differs from the "alias name" that is specified when setting Fibre Channel switch

zoning. However, it is recommended to set both aliases to the same name.

T_ID (SCSI target ID)

•

The SCSI target ID (decimal value) that is to be defined for each CA (check using ETERNUSmgr or ETERNUS

Web GUI)

For switch connections, the SCSI target ID is irrelevant to the physical protocol, however it must be defined

as a Solaris OS SCSI driver setting. Values matched to the server environment and connection state of the

devices must be set beforehand.

It is recommended to set the same target ID to CAs that configures a multipath.

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris

Instance name

WWN

fjpfca0

100000000e248434

fjpfca1

100000000e24846f

25)) that summarizes information relating to CA in the ETERNUS DX/AF stor-

Alias name

WWN

DX400_CM0CA0P0

202000e000cb0001

203000e000cb0001

DX400_CM1CA0P0

Physical path name

/pci@4,2000/fibre-channel@1

/pci@6,4000/fibre-channel@2

"Appendix A Various Manage-

T_ID

P3AM-3712-15ENZ0