Fujitsu ETERNUS DX Disk 구성 매뉴얼 - 페이지 18

{카테고리_이름} Fujitsu ETERNUS DX Disk에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS DX Disk 29 페이지. Server connection, fcoe for linux driver settings for converged network adapter cards
Fujitsu ETERNUS DX Disk에 대해서도 마찬가지입니다: 사용자 설명서 (35 페이지), 사용자 설명서 (42 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (44 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (25 페이지), 구성 매뉴얼 (32 페이지), 구성 매뉴얼 (35 페이지), 구성 매뉴얼 (31 페이지), 구성 매뉴얼 (43 페이지), 구성 매뉴얼 (21 페이지), 구성 매뉴얼 (24 페이지)

Chapter 5

Setting Up the Server to Recognize the Logical

Units

Logical units need to be recognized with the sd driver or hddv driver.

Skip this chapter if using the ETERNUS Multipath Driver or GR Multipath Driver "grmpdautoconf" command.

5.1

Recognizing Logical Units with the sd Driver

Make the server recognize the ETERNUS DX/AF logical units using the sd driver.

First, confirm that the logical unit settings on the ETERNUS DX/AF storage systems are correct. Next, add the

descriptions of the logical units in the sd driver's configuration file (sd.conf) to register the units.

Then reboot the server to get it to recognize the logical units.

Refer to

"5.2 Recognizing Logical Units with the hddv Driver" (page 21)

5.1.1

Logical Unit Recognition

Add descriptions of the logical units to the sd driver configuration file (sd.conf) using a text editor, such as vi.

•

Solaris 11 OS

If the "/etc/driver/drv/sd.conf" file does not exist, copy the "/kernel/drv/sd.conf" file to the "/etc/driver/drv"

directory and add the line to the newly copied "sd.conf" file.

If the "/etc/driver/drv/sd.conf" file exists, do not copy over the file but instead add the line to the existing

"sd.conf" file.

Solaris 10 OS

•

Add the line to the "/kernel/drv/sd.conf" file.

Do not delete the lun=0 description for the system disk target ID.

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris

when using the hddv driver.

P3AM-3712-15ENZ0