Fujitsu ETERNUS DX Disk 구성 매뉴얼 - 페이지 16

{카테고리_이름} Fujitsu ETERNUS DX Disk에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS DX Disk 29 페이지. Server connection, fcoe for linux driver settings for converged network adapter cards
Fujitsu ETERNUS DX Disk에 대해서도 마찬가지입니다: 사용자 설명서 (35 페이지), 사용자 설명서 (42 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (44 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (25 페이지), 구성 매뉴얼 (32 페이지), 구성 매뉴얼 (35 페이지), 구성 매뉴얼 (31 페이지), 구성 매뉴얼 (43 페이지), 구성 매뉴얼 (21 페이지), 구성 매뉴얼 (24 페이지)

페이지 인쇄
Fujitsu ETERNUS DX Disk 구성 매뉴얼
Chapter 4
Setting Up the Server
4.5
Re-checking the Settings
Incorrect setting example 2
•
Cables are not connected correctly.
#/usr/sbin/FJSVpfca/chk_conf -v
target 'fjpfca1t16'(alias=DX400_CM0) seems to be absent on fjpfca#1
target 'fjpfca2t17'(alias=DX400_CM1) seems to be absent on fjpfca#2
******************************
*port definition*
instance
------------------------------
fjpfca1
fjpfca2
*target definition*
instance
------------------------------------------------------------------------------
fjpfca1
fjpfca2
The following items can be confirmed by executing the "chk_conf" command:
-
Syntax check of general configuration file
Detailed syntax check relating to the following properties
-
alias
•
port
•
fcp-bind-target
•
Reference relationship between fcp-bind-target and alias
•
Whether or not the target device described in fcp-bind-target actually exists
•
2
Re-check target binding setting
By using the "chk_conf" command, you can check any errors in the configuration file, and check the Fi-
bre Channel cable physical connections. However, you cannot confirm whether or not target binding
based upon the system configuration has been performed correctly using the "chk_conf" command.
Re-check the following points before restarting the server.
•
Is the target binding set according to the system configuration?
•
Is the target binding table recorded according to the information in the WWN instance management
table?
Is "fjpfca.conf" set up according to the information of the target binding table?
•
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
status
options
found
nport
found
nport
t-id
wwn
16
0x213100e000cb0001
17
no binding
16
Copyright 2017 FUJITSU LIMITED
status
throt
alias
none
UNDEF
DX400_CM0CA0P0
none
UNDEF
DX400_CM1CA0P0
P3AM-3712-15ENZ0