Fujitsu ETERNUS DX100 S3 수동 서버 연결 구성 - 페이지 10

{카테고리_이름} Fujitsu ETERNUS DX100 S3에 대한 수동 서버 연결 구성을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS DX100 S3 12 페이지. Hybrid storage systems, all-flash arrays, power synchronized unit
Fujitsu ETERNUS DX100 S3에 대해서도 마찬가지입니다: 수동 서버 연결 구성 (12 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (13 페이지), 설정 매뉴얼 (15 페이지), 안전 주의사항 (12 페이지)

페이지 인쇄

1. Setting the To-Server Connection Type (Setting the Sas Port Parameters)

Chapter 2

Setting Up the ETERNUS DX

2.2

Specific Settings

2.1.6

Allocating LUN Groups (Setting the Host Affinity)

Allocate the relationship between registered SAS hosts (SAS addresses), CA port groups, and LUN groups us-

ing the Host Affinity setting function to specify which LUNs to be accessed. This sets access restrictions to the

ETERNUS DX from each server.

Refer to "Connectivity (Basic Information)" in "ETERNUS Web GUI User's Guide" for details, and set the LUN

groups.

If the one-to-one relationship between the SAS addresses and SAS cards cannot be determined, the Host

Affinity may not be set correctly.

In this case, trying various settings may be necessary until the server is able to recognize the ETERNUS DX

logical disks.

2.2

Specific Settings

Specific settings for the OS and connection configuration are not required.

2.2.1

Setting the CA Reset Groups

Because all of the ports are configured to be members of one CA reset group in the initial setting, the reset

group settings do not need to be changed.

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

P3AM-8542-04ENZ0