Fujitsu ETERNUS DX100 S3 수동 서버 연결 구성 - 페이지 3
{카테고리_이름} Fujitsu ETERNUS DX100 S3에 대한 수동 서버 연결 구성을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS DX100 S3 12 페이지. Hybrid storage systems, all-flash arrays, power synchronized unit
Fujitsu ETERNUS DX100 S3에 대해서도 마찬가지입니다: 수동 서버 연결 구성 (12 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (13 페이지), 설정 매뉴얼 (15 페이지), 안전 주의사항 (12 페이지)
![Fujitsu ETERNUS DX100 S3 수동 서버 연결 구성](/uploads/products/server2/2443546/2443546.jpg)
This manual briefly explains the operations that need to be performed by the user in order to connect an
ETERNUS DX to a server running Solaris OS, Windows
This manual should be used in conjunction with any other applicable user manuals, such as those for the
ETERNUS DX, servers, OS, SAS cards, and drivers.
Refer to "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Notations" for the notations
used in this manual such as product trademarks and product names.
This manual references the following documents:
•
ETERNUS Web GUI User's Guide
This manual is designed for use with the following ETERNUS DX storage systems:
ETERNUS DX60 S3/DX100 S3/DX200 S3 Disk storage system
•
The Contents and Structure of this Manual
This manual is composed of the following two chapters.
"Chapter 1 Workflow" (page 6)
•
This chapter describes the workflow when setting up an ETERNUS DX.
"Chapter 2 Setting Up the ETERNUS DX" (page 8)
•
This chapter describes how to set up an ETERNUS DX.
3
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2014 FUJITSU LIMITED
®
, Linux, or VMware ESX via a SAS interface.
Preface
4th Edition
December 2014
P3AM-8542-04ENZ0