Fujitsu ETERNUS8000 900 매뉴얼 - 페이지 19

{카테고리_이름} Fujitsu ETERNUS8000 900에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS8000 900 28 페이지. Disk storage systems (fibre channel) for oracle solaris
Fujitsu ETERNUS8000 900에 대해서도 마찬가지입니다: 매뉴얼 (21 페이지), 서버 연결 매뉴얼 (25 페이지), 서버 연결 매뉴얼 (32 페이지), 연결 매뉴얼 (19 페이지)

페이지 인쇄

Chapter 7 Installing the iSCSI Software Initiator and Setting Up the Server

7.2 Setting Up the Server

7.2.3

Server Settings when CHAP Authentication is Used

The following operations are required for CHAP authentication.

•

Setting the Initiator secret

(password setting to connect to the ETERNUS Disk storage system)

•

Setting the Initiator CHAP Name

(CHAP name setting to connect to the ETERNUS Disk storage system)

•

Enabling CHAP

Procedure

P3AM-4182-03ENZ0

Server Connection Guide (iSCSI) for Oracle Solaris

Set the Initiator secret.

This is a password that must be set so that the Initiator can connect to the target

ETERNUS Disk storage system. The CHAP secret set here must match that set in Target

information.

Example:

To set the password "initiator000"

# iscsiadm modify initiator-node --CHAP-secret

Enter secret:initiator000

Re-enter secret:initiator000

Passwords are restricted to a maximum of 16 characters by the

Solaris operating system. For 17 or more characters, the following

message is output:

Iscsiadm: secret too long, maximum length is 16

Iscsiadm: Unable to complete operation

Set the Initiator CHAP Name.

The Initiator Node Name is the default Initiator CHAP Name. Use the "iscsiadm" command

to set a new Initiator CHAP Name. The Initiator CHAP Name set here must match that set

in Target information.

# iscsiadm modify initiator-node --CHAP-name CHAP_Name

Example:

To set "initiator" as the CHAP Name

# iscsiadm modify initiator-node --CHAP-name initiator