Fujitsu ETERNUS8000 900 Manual - Página 19

Procurar online ou descarregar pdf Manual para Armazenamento Fujitsu ETERNUS8000 900. Fujitsu ETERNUS8000 900 28 páginas. Disk storage systems (fibre channel) for oracle solaris
Também para Fujitsu ETERNUS8000 900: Manual (21 páginas), Manual de ligação do servidor (25 páginas), Manual de ligação do servidor (32 páginas), Manual de ligação (19 páginas)

Fujitsu ETERNUS8000 900 Manual
Chapter 7 Installing the iSCSI Software Initiator and Setting Up the Server
>
7.2 Setting Up the Server
7.2.3

Server Settings when CHAP Authentication is Used

The following operations are required for CHAP authentication.
Setting the Initiator secret
(password setting to connect to the ETERNUS Disk storage system)
Setting the Initiator CHAP Name
(CHAP name setting to connect to the ETERNUS Disk storage system)
Enabling CHAP
Procedure
1
2
P3AM-4182-03ENZ0
Server Connection Guide (iSCSI) for Oracle Solaris
Set the Initiator secret.
This is a password that must be set so that the Initiator can connect to the target
ETERNUS Disk storage system. The CHAP secret set here must match that set in Target
information.
Example:
To set the password "initiator000"
# iscsiadm modify initiator-node --CHAP-secret
Enter secret:initiator000
Re-enter secret:initiator000
Passwords are restricted to a maximum of 16 characters by the
Solaris operating system. For 17 or more characters, the following
message is output:
Iscsiadm: secret too long, maximum length is 16
Iscsiadm: Unable to complete operation
Set the Initiator CHAP Name.
The Initiator Node Name is the default Initiator CHAP Name. Use the "iscsiadm" command
to set a new Initiator CHAP Name. The Initiator CHAP Name set here must match that set
in Target information.
# iscsiadm modify initiator-node --CHAP-name CHAP_Name
Example:
To set "initiator" as the CHAP Name
# iscsiadm modify initiator-node --CHAP-name initiator
19
Copyright 2010 FUJITSU LIMITED