Brother MFC-J265W 사용자 설명서 - 페이지 14

{카테고리_이름} Brother MFC-J265W에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-J265W 49 페이지. Quick setup guide - spanish
Brother MFC-J265W에 대해서도 마찬가지입니다: 설치 매뉴얼 (35 페이지), 고급 사용자 설명서 (50 페이지), 빠른 설정 매뉴얼 (33 페이지), (영어) 빠른 구성 가이드 (35 페이지)

페이지 인쇄

Chapter 3

Additional sending

operations

Sending a fax manually

Manual transmission lets you hear the

dialling, ringing and fax-receiving tones while

sending a fax.

Note

(MFC-J410 only)

To send a multiple page fax, use the ADF.

Press

(FAX).

Load your document.

To listen for a dial tone press Hook or

pick up the handset of the external

telephone.

Dial the fax number.

When you hear the fax tone, press

Mono Start or Color Start.

Choose Send when you select the

Fax Mode to Advanced Mode and

send the fax from the scanner glass.

(See Setting the Fax Logic (sending and

receiving sequence) in chapter1 in the

Basic User's Guide.)

Replace the handset.

Dual Access

(Monochrome only)

You can dial a number and start scanning the

fax into memory—even when the machine is

sending from memory, receiving faxes or

printing PC data. The LCD shows the new job

number and available memory.

The number of pages you can scan into the

memory will vary depending on the data that

is printed on them.

Note

If the Out of Memory message

appears, press Stop/Exit to cancel or

Mono Start to send the pages scanned so

far.

Broadcasting

(Monochrome only)

Broadcasting is when the same fax message

is automatically sent to more than one fax

number. You can include Groups, Speed Dial

numbers, and up to 50 manually dialled

numbers in the same broadcast.

After the broadcast is finished, a Broadcast

Report will be printed.

Press

Load your document.

Press a or b to choose Broadcasting.

Press OK.

(FAX).