Brother MFC-J265W Gebruikershandleiding - Pagina 14
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Brother MFC-J265W. Brother MFC-J265W 49 pagina's. Quick setup guide - spanish
Ook voor Brother MFC-J265W: Installatiehandleiding (35 pagina's), Geavanceerde gebruikershandleiding (50 pagina's), Handleiding voor snelle installatie (33 pagina's), (Engels) Snelle configuratiegids (35 pagina's)
Pagina afdrukken
Chapter 3
Additional sending
operations
Sending a fax manually
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
Note
(MFC-J410 only)
To send a multiple page fax, use the ADF.
a
Press
(FAX).
b
Load your document.
c
To listen for a dial tone press Hook or
pick up the handset of the external
telephone.
d
Dial the fax number.
e
When you hear the fax tone, press
Mono Start or Color Start.
Choose Send when you select the
Fax Mode to Advanced Mode and
send the fax from the scanner glass.
(See Setting the Fax Logic (sending and
receiving sequence) in chapter1 in the
Basic User's Guide.)
f
Replace the handset.
8
Dual Access
(Monochrome only)
3
You can dial a number and start scanning the
fax into memory—even when the machine is
3
sending from memory, receiving faxes or
printing PC data. The LCD shows the new job
number and available memory.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
If the Out of Memory message
appears, press Stop/Exit to cancel or
Mono Start to send the pages scanned so
far.
Broadcasting
(Monochrome only)
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups, Speed Dial
numbers, and up to 50 manually dialled
numbers in the same broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
a
Press
b
Load your document.
c
Press a or b to choose Broadcasting.
Press OK.
(FAX).
3
3