Brother 2 매뉴얼 - 페이지 25

{카테고리_이름} Brother 2에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother 2 39 페이지. Hewlett-packard laser printer user guide
Brother 2에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지)

페이지 인쇄
Brother 2 매뉴얼

Removing the Roll Feeder To Feed Using a Mat

The roll feeder must be removed in order to attach material to a mat for cutting.
a
Lift up the base attachment to remove it from the
machine.
1
a Base attachment
b
Pull the feeder release lever (on the right side of the
machine) toward you.
a Feeder release lever
Only the right side of the shaft is raised, and the shaft is
unlocked.
c
Grab the feed roller and feed roller lock dial, and then,
while holding the feed roller in place, rotate the feed
roller lock dial toward the back to the unlock position
( ).
The feed roller can be slid.
1
a Feed roller
b Feed roller lock dial
24
1
2
d
Slide the feed roller from
a Feed roller
e
Grab the feed roller and feed roller lock dial, and then,
while holding the feed roller in place, rotate the feed
roller lock dial toward you to the lock position ( ).
The feed roller is locked in place.
2
1
a Feed roller
b Feed roller lock dial
f
Return the feeder release lever (on the right side of the
machine) to its original position.
a Feeder release lever
Only the right side of the shaft is lowered, and the shaft is
locked.
to
.
1
1