Brother CP-2000 사용자 설명서 - 페이지 19

{카테고리_이름} Brother CP-2000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother CP-2000 33 페이지. Copyboard
Brother CP-2000에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지), 브로셔 및 사양 (4 페이지), 부품 참조 목록 (18 페이지)

페이지 인쇄

Loading the paper

In order to print out what is written on the copyboard, paper must first be loaded in the

printer. The maximum diameter of the paper roll that can be installed in the copyboard is

2.6 in. (66 mm).

Open the paper compartment by pulling

up its latch.

Do not open the paper compart-

ment while the unit is printing.

While gently pressing down on the center of the paper guide bar, insert

the roll of paper into the paper compartment.

The paper should unroll from the top and enough paper (about 8 in. (20 cm))

should be pulled out to allow it to be torn off easily.

If there is slack in the paper, tighten it by holding the core and pulling on the paper.

Release the bar while making sure that

the paper feeds over it, and then lift the

paper compartment cover with both

hands and firmly close it.

Be sure to pass the paper over the guide bar.

3. Operation