Brother CP-2000 사용자 설명서 - 페이지 20

{카테고리_이름} Brother CP-2000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother CP-2000 33 페이지. Copyboard
Brother CP-2000에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지), 브로셔 및 사양 (4 페이지), 부품 참조 목록 (18 페이지)

페이지 인쇄

3. Operation

Tear off the excess paper by holding the

side of the paper and pulling it upward

and across.

Remove the roll of paper before transporting the copyboard, otherwise it may

come unrolled in the printer and cause a paper jam.

Power supply

Follow the precautions below to reduce the risk of electric shock or fire.

If the unit will not be used for a long period of time, disconnect the AC adaptor

from the wall outlet.

Do not use the AC adaptor outdoors. It can only be used indoors.

Do not allow any objects to come into contact with the AC adaptor or its cords.

The AC adaptor must not be serviced by the user. If repairs are required, contact

the nearest authorized Brother Service Center or the Brother Service Center

indicated in the warranty documentation.

If the AC adaptor requires cleaning, use only a dry cloth. Never use water or

cleaning fluids, since this is extremely dangerous.

Be careful not to pinch or damage either adaptor cable when folding up the stand

or moving the copyboard.

Use only enclosed AC adaptor. Use of other AC adaptor will void the warranty.

Connect the AC cord to the AC adaptor.

Connect the AC adaptor cord to the DC jack on the left side of the printer

Connect the AC cord to an electrical wall outlet.

Set the power supply switch on the left side of the printer to "|" to turn on

the copyboard.