AEG NSC7G181DS 사용자 설명서 - 페이지 20

{카테고리_이름} AEG NSC7G181DS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG NSC7G181DS 28 페이지.

www.aeg.com

7.5 Installing and replacing

the CleanAir+ filter

The CleanAir+ filter is an activated

carbon filter that absorbs bad odours and

allows you to preserve the best flavour

and aroma for all foodstuffs without risk

of odour cross-contamination.

Handle the air filter carefully

to avoid scratching its

surface.

On delivery, the air filter is in

a plastic bag to preserve

performance.

Install the air filter before activating the

appliance.

1. Unpack the air filter from the plastic

bag.

2. Open the plastic housing and put the

pleated surface on the grid, fitting the

filter inside the marked area on the

gridded surface.

3. Hold the filter down while closing the

plastic housing until you hear a click.

4. Remove the top glass shelf from the

fridge compartment. Slip the plastic

housing with the air filter on the left

side of the glass shelf.

5. Insert the glass shelf back in the

fridge compartment. Be careful not to

hit the filter when inserting the glass

shelf.

Replacing the CleanAir+ filter

1. Open the plastic housing.