AEG NSC8M191DS 사용자 설명서 - 페이지 10
{카테고리_이름} AEG NSC8M191DS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG NSC8M191DS 32 페이지.
페이지 인쇄
10
www.aeg.com
ECO button
12
4.1 Switching on
Connect the mains plug to the power
socket.
To select a different set temperature,
refer to "Temperature regulation".
If
to "Troubleshooting".
4.2 Switching off
1. Press and hold the fridge
temperature button and freezer
temperature button simultaneously
for 5 seconds
The display shows blinking
2. Once the appliance is switched off,
the display reads
3. Disconnect the mains plug from the
power socket.
4.3 Temperature regulation
The temperature range may vary
between -15°C and -24°C for freezer and
between 2°C and 8°C for fridge.
Press the temperature buttons to set the
temperature of the appliance.
The recommended set temperature is:
• +4°C for the fridge
• -18°C for the freezer
You may set the recommended
temperature manually with temperature
buttons or by switching on the ECO
function. Refer to "ECO function" for
more information
The temperature indicators show the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure, the
appliance goes back to the
set temperature.
4.4 Switching off the fridge
It is possible to switch off only the fridge
compartment leaving the freezer
compartment on.
appears on the display, refer
.
.
1. Press and hold the fridge
temperature button for 5 seconds.
The display shows blinking
2. Once the fridge compartment is
switched off, the display reads
4.5 Switching on the fridge
To switch on the fridge:
1. Press and hold the fridge
temperature button for 5 seconds.
The display shows blinking
2. The fridge compartment is switched
on and the previous set temperature
is restored.
To adjust the temperature,
refer to "Temperature
regulation".
4.6 Switching off the freezer
It is possible to switch off only the freezer
compartment leaving the fridge
compartment on.
1. Press and hold the freezer
temperature button for 5 seconds.
The display shows blinking
2. Once the freezer compartment is
switched off, the display reads
4.7 Switching on the freezer
To switch on the freezer compartment:
1. Press and hold the freezer
temperature button for 5 seconds.
The display shows blinking
2. The freezer compartment is switched
on and the previous set temperature
is restored.
To adjust the temperature,
refer to "Temperature
regulation".
4.8 MultiSwitch
With the MultiSwitch function, you can
convert the freezer compartment into a
fridge and thus effectively expand the
appliance's fridge capacity.
.
.
.
.
.
.