AEG NSC8M191DS 사용자 설명서 - 페이지 11
{카테고리_이름} AEG NSC8M191DS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG NSC8M191DS 32 페이지.
페이지 인쇄
Before activating the
MultiSwitch function remove
the frozen food from the
freezer compartment to
avoid accidental defrosting.
To convert the freezer compartment into
a fridge:
1. Tap the freezer temperature button
repeatedly until the display shows
.
starts blinking.
2. Press
within the next 7 seconds.
If you do not press the button within
this time, the freezer compartment
will not convert into a fridge.
3. The freezer temperature indicator
shows the temperature of the
MultiSwitch compartment (4°C).
The MultiSwitch
compartment reaches the
set temperature after 24 h.
Wait until the MultiSwitch
compartment has reached
the set temperature before
using it.
When the MultiSwitch function is on:
• the High temperature alarm is
disabled
• it is not possible to activate the Extra
Freeze function.
The MultiSwitch function deactivates
when you switch off the appliance.
The MultiSwitch function resumes
operation once the power is restored
after a power failure.
The MultiSwitch function deactivates
when you switch off the converted
compartment.
Before deactivating the
MultiSwitch function, remove
the food from the
MultiSwitch compartment to
avoid freezing the fresh
food.
To convert the MultiSwitch compartment
back into a freezer:
1. Press the freezer temperature button.
starts blinking.
2. Press
within the next 7 seconds.
If you do not press the button within
this time, the MultiSwitch
compartment will not convert back
into a freezer.
3. The freezer temperature indicator
shows the temperature of the freezer
compartment.
The MultiSwitch
compartment reaches the
set temperature after 24 h.
Wait until the MultiSwitch
compartment has reached
the set temperature before
using it.
The High temperature alarm starts
working again one hour after deactivating
the MultiSwitch function.
4.9 ECO function
The ECO function sets the optimal
temperature to ensure food preservation
while minimizing energy consumption.
1. To activate the function press the
ECO button.
The fridge temperature is set to +4°C
and the freezer temperature to -18°C.
2. To deactivate the function, press the
ECO button again or select a
different set temperature (refer to
"Temperature regulation").
After deactivating the ECO function, the
fridge temperature is set to +2°C and the
freezer temperature to -20°C.
Activation of the ECO
deactivates Extra Cool and
Extra Freeze functions.
The ECOMETER indicator
shows the appliance's
current energy consumption.
Three fully lit bars indicate
the most energy-efficient
setup.
4.10 Extra Cool function
With the Extra Cool function, you may
rapidly cool large amounts of warm food,
for example after doing grocery
shopping, without warming food already
stored in the fridge compartment.
ENGLISH
11