Fujitsu PRIMERGY LTO2 사용자 설명서 - 페이지 18
{카테고리_이름} Fujitsu PRIMERGY LTO2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu PRIMERGY LTO2 28 페이지. Half-height sas tape drive
페이지 인쇄Write protecting cartridges
WARNING!
Always remove the cartridge from the tape drive before you change the write protection.
If you want to protect the data on a cartridge from being altered or overwritten, you can write protect
the cartridge.
•
To write protect a cartridge, push the switch to the right to prevent any data recording on the
cartridge. Note the padlock on the tab that indicates that the cartridge is protected.
•
To write enable a cartridge, push the switch to the left to allow data recording on the cartridge.
Figure 5
on page 18 illustrates the location of the write-protect tab.
1. Write-protect tab
Figure 5 Write protecting a cartridge
.
CAUTION:
Write-protection will not protect your cartridges against magnets. Write-protection will not prevent
a cartridge being erased by bulk-erasure or degaussing. Do not bulk erase Ultrium format cartridges.
This will destroy pre-recorded servo information and make the cartridge unusable.
18
Use the correct media