Fujitsu PRIMERGY LTO2 Kullanıcı Kılavuzu - Sayfa 18

Depolama Fujitsu PRIMERGY LTO2 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Fujitsu PRIMERGY LTO2 28 sayfaları. Half-height sas tape drive

Sayfayı Yazdır

Write protecting cartridges

WARNING!
Always remove the cartridge from the tape drive before you change the write protection.
If you want to protect the data on a cartridge from being altered or overwritten, you can write protect
the cartridge.
•
To write protect a cartridge, push the switch to the right to prevent any data recording on the
cartridge. Note the padlock on the tab that indicates that the cartridge is protected.
•
To write enable a cartridge, push the switch to the left to allow data recording on the cartridge.
Figure 5
on page 18 illustrates the location of the write-protect tab.
1. Write-protect tab
Figure 5 Write protecting a cartridge
.
CAUTION:
Write-protection will not protect your cartridges against magnets. Write-protection will not prevent
a cartridge being erased by bulk-erasure or degaussing. Do not bulk erase Ultrium format cartridges.
This will destroy pre-recorded servo information and make the cartridge unusable.
18
Use the correct media