AEG OKO-SANTO 1650-6 TK 사용 설명서 - 페이지 17

{카테고리_이름} AEG OKO-SANTO 1650-6 TK에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG OKO-SANTO 1650-6 TK 24 페이지. Larder fridge

페이지 인쇄

1. Starting up and Temperature Regulation

Symptom

Appliance does not work.

Appliance cools too much.

The food is too warm.

Interior lighting does not

work.

Heavy build up of frost,

possibly also on the door

seal.

Possible Cause

Appliance is not switched

on.

Mains plug is not plugged

in or is loose.

Fuse has blown or is

defective

Socket is defective.

Temperature is set too

cold.

Temperature is not

properly adjusted.

Door was open for an

extended period.

A large quantity of warm

food was placed in the

appliance within the last

24 hours.

The appliance is near a

heat source.

Light bulb is defective.

Door seal is not air tight

(possibly after reversing

the door).

Remedy

Switch on the appliance.

Insert mains plug.

Check fuse, replace if nec-

essary.

Mains malfunctions are to

be corrected by an

electrician.

Turn the temperature reg-

ulator to a warmer

setting temporarily.

Please look in the "Initial

Start Up" section.

Open the door only as long

as necessary.

Turn the temperature reg-

ulator to a colder setting

temporarily.

Please look in the

"Installation location" section.

Please look in the "Changing

the Light Bulb" sections.

Carefully warm the leaking

sections of the door seal

with a hair dryer (on a

cool setting). At the same

time shape the warmed

door seal by hand such

that it sits correctly.