AEG OKO-SANTO 1650-6 TK Kullanım Talimatları Kılavuzu - Sayfa 17

Buzdolabı AEG OKO-SANTO 1650-6 TK için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. AEG OKO-SANTO 1650-6 TK 24 sayfaları. Larder fridge

Sayfayı Yazdır
Symptom
Appliance does not work.
Appliance cools too much.
The food is too warm.
Interior lighting does not
work.
Heavy build up of frost,
possibly also on the door
seal.
Possible Cause
Appliance is not switched
on.
Mains plug is not plugged
in or is loose.
Fuse has blown or is
defective
Socket is defective.
Temperature is set too
cold.
Temperature is not
properly adjusted.
Door was open for an
extended period.
A large quantity of warm
food was placed in the
appliance within the last
24 hours.
The appliance is near a
heat source.
Light bulb is defective.
Door seal is not air tight
(possibly after reversing
the door).
Remedy
Switch on the appliance.
Insert mains plug.
Check fuse, replace if nec-
essary.
Mains malfunctions are to
be corrected by an
electrician.
Turn the temperature reg-
ulator to a warmer
setting temporarily.
Please look in the "Initial
Start Up" section.
Open the door only as long
as necessary.
Turn the temperature reg-
ulator to a colder setting
temporarily.
Please look in the
"Installation location" section.
Please look in the "Changing
the Light Bulb" sections.
Carefully warm the leaking
sections of the door seal
with a hair dryer (on a
cool setting). At the same
time shape the warmed
door seal by hand such
that it sits correctly.
17