AEG OKO-SANTO Series 사용 설명서 - 페이지 19

{카테고리_이름} AEG OKO-SANTO Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG OKO-SANTO Series 22 페이지. Automatic refrigerator
AEG OKO-SANTO Series에 대해서도 마찬가지입니다: 사용 설명서 (25 페이지)

페이지 인쇄

Changing the light bulb

Warning! There is a risk of electric shocks! Before changing the light

bulb, switch off the appliance and unplug it, or pull the fuse or the

circuit breaker.

Light bulb data: 220-240 V, max. 15 W

To switch off the appliance, turn the temperature regulator to positi-

on "0".

Unplug the mains plug.

To change the light bulb, undo the

screw.

Press the light bulb cover as shown

and slide it backwards.

Change the defective light bulb.

Refit the light bulb cover and the

screw.

Put the refrigerator back into operation.

Customer Service

If you cannot find the remedy for a malfunction in these operating

instructions, please contact your dealer or our customer service

department. Addresses and telephone numbers are listed in the

accompanying booklet "Guarantee Conditions/Customer Service

Locations".

Selective ordering of replacement parts can save unnecessary travel

and costs. For this reason always provide the following appliance

information:

• Model Name

• Model Number (PNC)

• Serial Number (S-No.)

This information can be found on the serial plate in the interior at the

left of the appliance. We recommend that you enter this information

here, so that it is handy if needed.

Note: The customer bears the costs of unjustified customer service

calls even during the guarantee period.

AEG65