AEG OKO-SANTO Series Kullanım Talimatları Kılavuzu - Sayfa 19
Buzdolabı AEG OKO-SANTO Series için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. AEG OKO-SANTO Series 22 sayfaları. Automatic refrigerator
Ayrıca AEG OKO-SANTO Series için: Kullanım Talimatları Kılavuzu (25 sayfalar)
Sayfayı Yazdır
Changing the light bulb
Warning! There is a risk of electric shocks! Before changing the light
bulb, switch off the appliance and unplug it, or pull the fuse or the
circuit breaker.
Light bulb data: 220-240 V, max. 15 W
To switch off the appliance, turn the temperature regulator to positi-
on "0".
Unplug the mains plug.
To change the light bulb, undo the
screw.
Press the light bulb cover as shown
and slide it backwards.
Change the defective light bulb.
Refit the light bulb cover and the
screw.
Put the refrigerator back into operation.
Customer Service
If you cannot find the remedy for a malfunction in these operating
instructions, please contact your dealer or our customer service
department. Addresses and telephone numbers are listed in the
accompanying booklet "Guarantee Conditions/Customer Service
Locations".
Selective ordering of replacement parts can save unnecessary travel
and costs. For this reason always provide the following appliance
information:
• Model Name
• Model Number (PNC)
• Serial Number (S-No.)
This information can be found on the serial plate in the interior at the
left of the appliance. We recommend that you enter this information
here, so that it is handy if needed.
Note: The customer bears the costs of unjustified customer service
calls even during the guarantee period.
58
AEG65