Brother MFC-440CN 빠른 설정 매뉴얼 - 페이지 14

{카테고리_이름} Brother MFC-440CN에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-440CN 34 페이지. Quick setup guide - english
Brother MFC-440CN에 대해서도 마찬가지입니다: 서비스 매뉴얼 (5 페이지), 설정 매뉴얼 (23 페이지), 빠른 설정 매뉴얼 (35 페이지), 서비스 매뉴얼 (17 페이지)

페이지 인쇄
Brother MFC-440CN 빠른 설정 매뉴얼
STEP1
Setting Up the Machine
12

Setting the phone line type

If you are connecting the machine to a line that
features PBX or ISDN to send and receive faxes, it is
also necessary to change the phone line type
accordingly by completing the following steps.
1
Press Menu.
2
Press a or b to choose Initial Setup.
Press OK.
3
Press a or b to choose Phone Line Set.
Press OK.
4
Press a or b to choose PBX, ISDN (or
Normal).
Press OK.
5
Press Stop/Exit.
PBX and TRANSFER
The machine is initially set to Normal, which lets the
machine connect to a standard PSTN (Public
Switched Telephone Network) line. However, many
offices use a central telephone system or Private
Automatic Branch Exchange (PBX). Your machine
can be connected to most types of PABX. The
machine's recall feature supports timed break recall
only (TBR). TBR will work with most PABX systems
allowing you to gain access to an outside line or send
calls to another extension. The feature works when
the Tel/R (MFC-440CN) or R (MFC-660CN) key is
pressed.
Note
You can program a Tel/R (MFC-440CN) or R
(MFC-660CN) key press as part of a number
stored in a Speed-Dial location. When
programming the Speed-Dial number, press Tel/R
or R first (the LCD shows '!'), then enter the
telephone number. If you do this, you do not need
to press Tel/R or R each time before you dial using
a Speed-Dial location.
(See Storing numbers in Chapter 8 of the User's
Guide.)
12
13
Choosing a Receive Mode
(For MFC-440CN)
There are four possible receive modes: Fax Only,
Fax/Tel, Manual and External TAD.
1
Press Menu.
2
Press a or b to choose Initial Setup.
Press OK.
3
Press a or b to choose Receive Mode.
Press OK.
4
Press a or b to choose the mode.
Press OK.
5
Press Stop/Exit.
For details, see Using receive modes in
Chapter 6 of the User's Guide.