Brother MFC-440CN 빠른 설정 매뉴얼 - 페이지 27
{카테고리_이름} Brother MFC-440CN에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-440CN 34 페이지. Quick setup guide - english
Brother MFC-440CN에 대해서도 마찬가지입니다: 서비스 매뉴얼 (5 페이지), 설정 매뉴얼 (23 페이지), 빠른 설정 매뉴얼 (35 페이지), 서비스 매뉴얼 (17 페이지)
Installing the Driver & Software
For Network Interface Users
(For Mac OS
Important
Make sure that you have finished the
instructions from Step 1 Setting Up the
Machine on pages 4 through 13.
1
Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
2
Connect the network cable into the LAN socket
marked with a
LAN socket inside the machine on the left as
shown below.
3
Carefully guide the network cable into the
trench as shown below, following the trench
around and toward the back of the machine.
Then, connect the cable to your network.
®
X 10.2.4 or greater)
symbol. You will find the
Improper Setup
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
Note
If both USB and LAN cables are being used, guide
both cables through the trench with one on top of
the other.
4
Lift the scanner cover to release the lock (
Gently push the scanner cover support down
(
) and close the scanner cover (
Note
Make sure that the machine is turned on by
connecting the power cord.
®
Macintosh
).
).
25