Fujitsu Fi-718PR 운영자 매뉴얼 - 페이지 9

{카테고리_이름} Fujitsu Fi-718PR에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Fi-718PR 17 페이지. Imprinter
Fujitsu Fi-718PR에 대해서도 마찬가지입니다: 운영자 매뉴얼 (18 페이지)

3. Basic Operation

To position the print cartridge for printing:

Open the print cartridge cover.

Hold the print cartridge holder, as below, and

slide it to the left or right within the document

width to set it at a suitable print starting position.

HINT

● The triangle-shaped protrusion on the locking lever of the

print cartridge holder indicates the current print position on

the page.

● In the upper back of the print cartridge holder are the

document size markings; use them to adjust for paper

sizes and printing positions.

● Put the actual document in the ADF and confirm that the

print cartridge is positioned within the document's width.

Use the paper guides to prevent paper jams due to curling of

the edges, as shown below.

Feed direction

Place the paper guides at the ends where the paper edges

will pass through.

Load the document in the scanner.

Open the print cartridge cover.

Slide the paper guides to the left and right edges

of the paper.

Paper guides

ATTENTION

Be careful not to let the paper guide touch or catch onto the

print circuit film.

HINT

When you wish to print on a section near the edge of wide

paper, remove the paper guide in order to open space for

the print cartridge, and attach the removed guide in the

center.

For Right-Edge Printing

For Left-Edge Printing

fi-718PR Imprinter Operator's Guide | 7