Fujitsu Fi-718PR 운영자 매뉴얼 - 페이지 7

{카테고리_이름} Fujitsu Fi-718PR에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Fi-718PR 17 페이지. Imprinter
Fujitsu Fi-718PR에 대해서도 마찬가지입니다: 운영자 매뉴얼 (18 페이지)

페이지 인쇄
Fujitsu Fi-718PR 운영자 매뉴얼
7.
Place the print cartridge into the holder as shown
below with its tab pointing to the right.
ATTENTION
Be careful not to let the print cartridge touch or catch onto
the print circuit film.
8.
Lower the locking lever of the print cartridge
holder until it locks in place.
9.
Position the print cartridge holder along where the
document will pass through.
10. Close the print cartridge cover.

2.3. Test Print

After installing the print cartridge, check if the printing
operation can be done.
HINT
For details about the operator panel, refer to
"fi-7160/fi-7260/fi-7180/fi-7280 Image Scanner Operator's Guide".
1.
Press the [Power] button on the operator panel on
the scanner.
The [Ready] screen is shown on the LCD.
2.
Load a blank document in the ADF paper chute
(feeder).
HINT
● Use an A4 or Letter size blank sheet. If the paper size is
smaller than A4 or Letter, printing may not complete
successfully.
● Confirm that the print cartridge is positioned within the
document width.
3.
Press the [Menu] button.
The [Settings Menu] screen is shown on the LCD.
fi-718PR Imprinter Operator's Guide | 5