Brother MFC490CW - Color Inkjet - All-in-One 빠른 설정 매뉴얼 - 페이지 4
{카테고리_이름} Brother MFC490CW - Color Inkjet - All-in-One에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC490CW - Color Inkjet - All-in-One 47 페이지. Mac network connection
Brother MFC490CW - Color Inkjet - All-in-One에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (48 페이지), 설정 및 설치 (5 페이지), 연결 매뉴얼 (6 페이지), 수리 지침 (2 페이지)
페이지 인쇄
Note
If you are sharing one telephone line with an
external telephone, connect it as shown below.
1
Extension telephone
2
External telephone
Note
If you are sharing one telephone line with an
external telephone answering machine, connect it
as shown below.
Set the receive mode to External TAD if
you have an external answering machine.
See Choose a Receive Mode on page 8.
For additional details, see Connecting an
external TAD (telephone answering device)
in Chapter 7 of the User's Guide.
4
1
2
(Example for Australia)
(Example for Australia)
4
Set Your Country (For
Australia / New Zealand
Customer Only)
You must set your country so that the machine works
correctly on local telecommunication lines in each
country.
a
Check that the power is turned on by
connecting the power cord.
b
Press a or b to select the country
(Australia or New zealand).
Set Country
Australia
Newzealand
Set Country
Press OK when the LCD shows your country.
c
The LCD prompts you to make sure of the
country again.
Australia
Yes
No
Set Country
d
If the LCD shows the correct country, press OK
to go to the next step.
Or press Clear/Back to go back to step b to
select the country again.
e
After the LCD shows Accepted for two
seconds, it shows Please Wait.
Select & Press
OK
Select & Press
OK